Standard Installation

Professional Installation
Standard Commercial/Small Business Installation includes those locations one or two floors high. Installation includes:

• Mounting the antenna (dish) to a flat concrete base, flat roof or wall using one of our standard mounting brackets. Antennas should be mounted out of the reasonable reach of small children. Standard Installation does not include the provision of a concrete base.
• Wall mounts cannot be fixed to 'infill' brickwork but must be attached to a reinforced concrete wall or building 'skeleton'. Building plans may be required to identify the location of the 'skeleton'.
• Two exterior cable runs or one dual run of up to 30m of standard RG6 (7mm diameter) coaxial cable with one point of entry through an exterior wall.
• Installing and weather sealing appropriate cable bushing.
• Conducting a cross polarization test of the DIRECWAY system to verify receipt of satellite signal on the installer laptop. Where possible, the installer will use the customer's PC to confirm receipt of the satellite signal.

Non-Standard Commercial/Small Business Installation includes:

• Installations with cable in excess of 30m from the DIRECWAY dish to the DIRECWAY receiver and/or requiring additional drops or hardware are classified as non-standard installs.
• Installations that require custom dish-mounts
• Locations that are unusually high or require specialised scaffolding or other safety equipment.

In all cases, the type of installation will be identified during the site survey and appropriate additional costs includes in the formal site quotation.